Split Ezy Pro Installation Guide
The installation of split air conditioning systems can be easy. However, a high-quality bracket must be present to ensure its effectiveness.
- Measure the bracket and set markings on the wall based on the bracket dimensions.
- Mark and cut out the stud to make room for the Split Ezy Pro bracket.
- Place the bracket flush with the front of the studs.
- Bend out the datum spike and the tabs.
- Install the pipes and cables into the bracket, then bend the tabs back.
- Plaster over the Split Ezy Pro so the datum spike penetrates the wall lining.
- Use the datum spike as a guide to level and mark the template.
- Cut the marked template out to fit the air conditioning system.
- Remove the datum spike, push the tabs back, and pull the pipes out.
- Affix the air conditioning unit bracket with self-tapping screws.
The pipes must be cut before installing the air conditioning unit.
